|
 |
|
Jim Bjelde, Walt Puryear, Bruce Adams, Jim Villers and Robby Ackerman
arriving |
|
 |
|
Gumbeaux's Cajun restaurant, our Friday evening gathering spot. |
|
 |
| Tom Hamilton and Ron Rapp sharing some stories. |
|
 |
| Ron Rabon and Don Freese meeting old friends. |
|
|
 |
|
Jim Huey, Kip Gibert, Jim Mitchell and Dave Polny |
|
 |
| Jim Villers and Don Drabik |
|
 |
| Our host, Jim Mitchell welcomes us to WinterTech |
|
 |
|
Tom Hamilton, Dean & Susan Turner and Steve Maiocco |
|
|
 |
|
Ellis Lovell having some HOT wings. |
|
|
| Good time |
|
|
| Good conversation |
|
|
| WinterTech was held at Bud's in Douglasville, GA;
owned by David Latham |
|
|
 |
|
A classroom was setup on the shop floor |
|
|
| David Latham introduces to his "Bud's" staff |
|
|
| David also displays an original Group Technical
Manual from 1989. |
|
|
| Club President Tom Hamilton talks about the Club's success
over the past few years. |
|
|
 |
|
Tom Hamilton presents David Latham with a set of club books signed by all
attendees |
|
 |
| A 190 SL in the paint booth ready for its first
coat of primer |
|
 |
| Jesse Young demonstrating one technique for pulling out a
minor fender dent. |
|
 |
|
Learning by seeing various techniques being demonstrated. |
|
|
 |
|
Bill Keyes trying his hand at spot welding the pull pins |
|
 |
|
Lyn Keyes spray painting a door panel |
|
 |
|
Ron Rabon of Ron's Restoration, held a clinic on interiors |
|
 |
|
Ron Rabon demonstrating the recovering a side panel |
|
|
 |
|
Keith Rabon showing some of the secrets of installing a convertible top. |
|
 |
|
Don Freese, Kip Gibert and Dean Turner paying close attention to Ron's
technique. |
|
 |
|
Gerry Carson recovering the "WinterTech 190 SL". |
|
 |
|
The Sunday class recovered the "WinterTech 190 SL". Great Job. |
|
|
 |
|
David and Sandy Latham grilling dinner. |
|
 |
|
Dinner
was served on the ramps of an automotive lift
|
|
 |
|
Steve Maiocco filling his plate with the GREAT burgers |
|
 |
|
Jim Mitchell and Dean Turner talking shop over dinner. |
|
|
 |
|
Lunch on the "shop floor" |
|
 |
|
Dave Polny displaying a front suspension he is prototyping |
|
 |
|
With advanced front disk brakes. |
|
 |
|
Rich Fosmoe inspecting so of Bud's "spare" parts. |
|
|
 |
|
Jon Bernardi with a MB 170 sedan that is awaiting restoration |
|
 |
|
Brad Brady, Bruce Adams and Walt Puryear chatting with Jim Mitchell |
|
 |
|
David Latham with Ellis Lovell |
|
 |
|
There were several cars to investigate and to compare. |
|
|
 |
|
Ellis Lovell documenting a detail for his later use |
|
 |
|
Bob Striker trying to make sense of the wiring behind the dash |
|
 |
|
Larry Spitzmiller and Bill & Lyn Keyes looking at the details |
|
 |
|
Alan Altman in front a beautiful 300 cabriolet under restoration. |
|
|
 |
|
Bruce Adams and Jim Villers had a meeting of the Volume 3
technical team |
|
 |
|
"The Dons" (Don Freese and Don Drabik) came with their special T-shirts. |
|
|
|
